Flat steel,refers to 12-300mm wide,3-60mm thick,rectangular section and slightly with a blunt edge of steel.Flat steel can be finished steel,can also be used as a blank for welding pipe and thin slab for rolling sheet.Main uses:flat steel as a finished material can be used for hoop iron,tools and mechanical parts,as building frame structure,escalator.

H-beam is a new type of steel for economic construction. H-beam has economical and reasonable cross-sectional shape, good mechanical properties, uniform extension of each point on the cross-section and small internal stress during rolling. Compared with ordinary I-beam, H-beam has the advantages of large cross-sectional modulus, light weight and metal saving, which can reduce the building structure by 30-40%. In addition, because its legs are parallel to the inner and outer sides and the leg ends are right angles, the welding and riveting work can be saved by 25%. It is often

The hex bars have good machinability,mechanical features and close dimensional precision as it is rolled steel.Hex bar is typically employed in heat exchangers, chemical equipment,aerospace parts,tanks and marine equipment,among its many uses.They are used in various industrial and commercial requirements and are supplied worldwide

I-beam is mainly divided into ordinary I-beam, light I-beam and low alloy light I-beam. Ordinary I-beam and light I-beam flanges are thick on the web plate and thin on the outside. Ordinary I-beam, light I-beam, because the cross-sectional dimensions are relatively high, narrow, so the section of the two main sleeve moment of inertia difference is large, which makes it in the scope of application has a great limitation. The use of I-beam shall be selected according to the requirements of the design drawings.

Steel Grade：Q195,Q235,Q345,45#, S20C, SAE1010,SAE1020.SAE1045,EN8,EN 19fC45,CK45,SS400 etc
Standard：ASTM A615Gr40/60,BSS4449 Gr460B,500B etc.
Diameter: 6mm-1200mm.
Length: 3000mm-12000mm or as client's request
Tolerance: +0.5mm/-0(dia),+5mm/-0(L)
Heat treatment: Normalized / Annealed / Quenched / tempered
Surface: black,mill,polished,brush,etc
Test: Ultrasonic test according to SEP 1921-84 G3 C/c
Application: Widely used in construction industry for reinforcing concret(Express way; office building, Bridge etc) Trasportation By sea(20' 40' container), parts of larger cross-sections, crankshafts, gears.

Steel Grade：Q195,Q235,Q345,45#, S20C, SAE1010,SAE1020.SAE1045,EN8,EN 19fC45,CK45,SS400 etc
Standard：ASTM A615Gr40/60,BSS4449 Gr460B,500B etc.
Diameter: 6mm-1200mm.
Length: 3000mm-12000mm or as client's request
Tolerance: +0.5mm/-0(dia),+5mm/-0(L)
Heat treatment: Normalized / Annealed / Quenched / tempered
Surface: black,mill,polished,brush,etc
Test: Ultrasonic test according to SEP 1921-84 G3 C/c
Application: Widely used in construction industry for reinforcing concret(Express way; office building, Bridge etc) Trasportation By sea(20' 40' container), parts of larger cross-sections, crankshafts, gears.

Steel Grade：Q195,Q235,Q345,45#, S20C, SAE1010,SAE1020.SAE1045,EN8,EN 19fC45,CK45,SS400 etc
Standard：ASTM A615Gr40/60,BSS4449 Gr460B,500B etc.
Diameter: 6mm-1200mm.
Length: 3000mm-12000mm or as client's request
Tolerance: +0.5mm/-0(dia),+5mm/-0(L)
Heat treatment: Normalized / Annealed / Quenched / tempered
Surface: black,mill,polished,brush,etc
Test: Ultrasonic test according to SEP 1921-84 G3 C/c
Application: Widely used in construction industry for reinforcing concret(Express way; office building, Bridge etc) Trasportation By sea(20' 40' container), parts of larger cross-sections, crankshafts, gears.

Steel Grade：Q195,Q235,Q345,45#, S20C, SAE1010,SAE1020.SAE1045,EN8,EN 19fC45,CK45,SS400 etc
Standard：ASTM A615Gr40/60,BSS4449 Gr460B,500B etc.
Diameter: 6mm-1200mm.
Length: 3000mm-12000mm or as client's request
Tolerance: +0.5mm/-0(dia),+5mm/-0(L)
Heat treatment: Normalized / Annealed / Quenched / tempered
Surface: black,mill,polished,brush,etc
Test: Ultrasonic test according to SEP 1921-84 G3 C/c
Application: Widely used in construction industry for reinforcing concret(Express way; office building, Bridge etc) Trasportation By sea(20' 40' container), parts of larger cross-sections, crankshafts, gears.